Frigidaire FGHS2655PF6B Ice Maker Manual

The Frigidaire FGHS2655PF6B is a high-efficiency ice maker designed to provide you with a steady supply of ice for all your needs. This manual covers essential information regarding safety, features, installation, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Maintenance 7. Troubleshooting

Features at a Glance

Key features include a high-capacity ice production system, easy-to-use controls, and a compact design that fits seamlessly into your kitchen.

Feature	Description
Ice Production	Produces up to 26 lbs of ice per day
Storage Capacity	Stores up to 3 lbs of ice
Water Supply	Direct water line connection
Control Panel	Easy-to-read LED indicators
Compact Design	Fits under most kitchen cabinets

Installation

Ensure the ice maker is installed on a level surface and connected to a water supply.

Unpack the ice maker and inspect for any damage.
Connect the water line to the back of the unit.
Plug the ice maker into a grounded outlet.
Turn on the water supply.

WARNING! Ensure all connections are secure to prevent leaks.

First-Time Setup

Power on the ice maker and follow the on-screen prompts to set up.

Set the ice thickness using the control panel.
Check the water supply connection.
Allow the unit to run for a few hours to start producing ice.

CAUTION! Do not operate the unit without water supply.

Specifications

Ice Production: Up to 26 lbs per day.
Storage Capacity: 3 lbs of ice.
Water Supply: Direct connection required.
Power Supply: 115V, 60Hz.
Dimensions: 14.5" W x 17.5" D x 25" H.
Weight: 50 lbs.

Controls and Settings

Access the control panel to adjust settings for ice thickness and operation modes.

Indicators: LED lights indicate water supply and ice production status.

Maintenance

Regular maintenance is essential for optimal performance.

Clean the ice maker every 6 months.
Replace the water filter as recommended.
Check for any blockages in the water line.

Troubleshooting

Symptom	Possible Cause	Corrective Action
No ice production	Water supply issue	Check water line connection and supply.
Ice is too thin	Thickness setting	Adjust the ice thickness setting on the control panel.
Unit is noisy	Improper installation	Ensure the unit is level and stable.
Ice has an off taste	Water quality	Check and replace the water filter if necessary.

Reset: Unplug the unit for 10 seconds to reset.