Frigidaire EFIC121-B-SSRED Ice Maker Manual

The Frigidaire EFIC121-B-SSRED is a compact ice maker designed to produce ice quickly and efficiently. With a sleek stainless steel design, it fits perfectly on countertops and is ideal for home use, parties, and gatherings. The ice maker features a simple control panel, a large water reservoir, and the ability to produce bullet ice in two sizes. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Water Supply 7. Operating the Ice Maker 8. Cleaning and Maintenance 9. Troubleshooting

Features at a Glance

Key components: Stainless steel body, control panel, water reservoir, ice basket, and drain plug.

Feature	Description
Compact Design	Space-saving design for easy placement on countertops
Ice Production	Produces up to 26 pounds of ice per day
Two Ice Sizes	Choose between small and large bullet ice
Water Reservoir	Large capacity for extended ice production
Control Panel	Easy-to-use buttons for operation
Drain Plug	Facilitates easy cleaning and maintenance

Installation

Unpack the ice maker and place it on a flat, stable surface near a power outlet.

Ensure there is adequate ventilation around the unit.
Connect the water supply if necessary, following the manufacturer's instructions.
Plug the unit into a grounded outlet.

WARNING! Do not place the ice maker in direct sunlight or near heat sources.

First-Time Setup

Power on the ice maker and fill the water reservoir with clean water.

Select the desired ice size using the control panel.
Press the power button to start the ice-making process.
Wait for the ice to be produced, which typically takes about 6-15 minutes.

CAUTION! Ensure the water reservoir is filled before starting the ice maker.

Specifications

Ice Production: Up to 26 lbs per day.
Ice Size Options: Small and large bullet ice.
Water Reservoir Capacity: 2.3 liters.
Dimensions: 14.1 x 9.5 x 11.4 inches.
Weight: Approximately 25 lbs.
Power Supply: 120V, 60Hz.
Operating Temperature: 50°F to 90°F.

Controls and Settings

The control panel features buttons for power, ice size selection, and indicators for ice production status.

Indicators: Ice full, water low, and power status lights.

Connecting Water Supply

If using a direct water line, follow the manufacturer's instructions for connecting the water supply.

Turn off the water supply before connecting.
Use the provided fittings to connect the water line.
Turn on the water supply and check for leaks.

Tip: Ensure all connections are secure to prevent leaks.

Operating the Ice Maker

To operate the ice maker, simply press the power button and select the desired ice size.

Monitor the ice production through the viewing window.
Empty the ice basket as needed to ensure continuous production.
Refill the water reservoir when low.

WARNING! Do not attempt to remove ice until the cycle is complete.

Cleaning and Maintenance

Regular cleaning is essential for optimal performance.

Unplug the ice maker before cleaning.
Use a soft cloth and mild detergent to clean the exterior.
Empty and clean the water reservoir and ice basket regularly.

CAUTION! Do not use abrasive cleaners or solvents.

Troubleshooting

Symptom	Possible Cause	Corrective Action
No ice production	Water reservoir empty	Fill the water reservoir and restart the unit.
Ice is too small	Ice size setting	Adjust the ice size setting on the control panel.
Unit is noisy	Improper placement	Ensure the unit is on a flat, stable surface.
Water leaks	Loose connections	Check all connections for tightness and leaks.

Reset: Unplug the unit for a few minutes to reset if necessary.